IT. Expert System.

Java Standard Edition (SE)

RoundRectangle2D


java.awt.geom

Class RoundRectangle2D

  • All Implemented Interfaces:
    Shape, Cloneable
    Direct Known Subclasses:
    RoundRectangle2D.Double, RoundRectangle2D.Float


    public abstract class RoundRectangle2D
    extends RectangularShape
    The RoundRectangle2D class defines a rectangle with rounded corners defined by a location (x,y), a dimension (w x h), and the width and height of an arc with which to round the corners.

    This class is the abstract superclass for all objects that store a 2D rounded rectangle. The actual storage representation of the coordinates is left to the subclass.

    Since:
    1.2
    • Constructor Detail

      • RoundRectangle2D

        protected RoundRectangle2D()
        This is an abstract class that cannot be instantiated directly. Type-specific implementation subclasses are available for instantiation and provide a number of formats for storing the information necessary to satisfy the various accessor methods below.
        Since:
        1.2
        See Also:
        RoundRectangle2D.Float, RoundRectangle2D.Double
    • Method Detail

      • getArcWidth

        public abstract double getArcWidth()
        Gets the width of the arc that rounds off the corners.
        Returns:
        the width of the arc that rounds off the corners of this RoundRectangle2D.
        Since:
        1.2
      • getArcHeight

        public abstract double getArcHeight()
        Gets the height of the arc that rounds off the corners.
        Returns:
        the height of the arc that rounds off the corners of this RoundRectangle2D.
        Since:
        1.2
      • setRoundRect

        public abstract void setRoundRect(double x,
                                          double y,
                                          double w,
                                          double h,
                                          double arcWidth,
                                          double arcHeight)
        Sets the location, size, and corner radii of this RoundRectangle2D to the specified double values.
        Parameters:
        x - the X coordinate to which to set the location of this RoundRectangle2D
        y - the Y coordinate to which to set the location of this RoundRectangle2D
        w - the width to which to set this RoundRectangle2D
        h - the height to which to set this RoundRectangle2D
        arcWidth - the width to which to set the arc of this RoundRectangle2D
        arcHeight - the height to which to set the arc of this RoundRectangle2D
        Since:
        1.2
      • setRoundRect

        public void setRoundRect(RoundRectangle2D rr)
        Sets this RoundRectangle2D to be the same as the specified RoundRectangle2D.
        Parameters:
        rr - the specified RoundRectangle2D
        Since:
        1.2
      • setFrame

        public void setFrame(double x,
                             double y,
                             double w,
                             double h)
        Sets the location and size of the framing rectangle of this Shape to the specified rectangular values.
        Specified by:
        setFrame in class RectangularShape
        Parameters:
        x - the X coordinate of the upper-left corner of the specified rectangular shape
        y - the Y coordinate of the upper-left corner of the specified rectangular shape
        w - the width of the specified rectangular shape
        h - the height of the specified rectangular shape
        Since:
        1.2
        See Also:
        RectangularShape.getFrame()
      • contains

        public boolean contains(double x,
                                double y)
        Tests if the specified coordinates are inside the boundary of the Shape, as described by the definition of insideness.
        Parameters:
        x - the specified X coordinate to be tested
        y - the specified Y coordinate to be tested
        Returns:
        true if the specified coordinates are inside the Shape boundary; false otherwise.
        Since:
        1.2
      • intersects

        public boolean intersects(double x,
                                  double y,
                                  double w,
                                  double h)
        Tests if the interior of the Shape intersects the interior of a specified rectangular area. The rectangular area is considered to intersect the Shape if any point is contained in both the interior of the Shape and the specified rectangular area.

        The Shape.intersects() method allows a Shape implementation to conservatively return true when:

        • there is a high probability that the rectangular area and the Shape intersect, but
        • the calculations to accurately determine this intersection are prohibitively expensive.
        This means that for some Shapes this method might return true even though the rectangular area does not intersect the Shape. The Area class performs more accurate computations of geometric intersection than most Shape objects and therefore can be used if a more precise answer is required.
        Parameters:
        x - the X coordinate of the upper-left corner of the specified rectangular area
        y - the Y coordinate of the upper-left corner of the specified rectangular area
        w - the width of the specified rectangular area
        h - the height of the specified rectangular area
        Returns:
        true if the interior of the Shape and the interior of the rectangular area intersect, or are both highly likely to intersect and intersection calculations would be too expensive to perform; false otherwise.
        Since:
        1.2
        See Also:
        Area
      • contains

        public boolean contains(double x,
                                double y,
                                double w,
                                double h)
        Tests if the interior of the Shape entirely contains the specified rectangular area. All coordinates that lie inside the rectangular area must lie within the Shape for the entire rectangular area to be considered contained within the Shape.

        The Shape.contains() method allows a Shape implementation to conservatively return false when:

        • the intersect method returns true and
        • the calculations to determine whether or not the Shape entirely contains the rectangular area are prohibitively expensive.
        This means that for some Shapes this method might return false even though the Shape contains the rectangular area. The Area class performs more accurate geometric computations than most Shape objects and therefore can be used if a more precise answer is required.
        Parameters:
        x - the X coordinate of the upper-left corner of the specified rectangular area
        y - the Y coordinate of the upper-left corner of the specified rectangular area
        w - the width of the specified rectangular area
        h - the height of the specified rectangular area
        Returns:
        true if the interior of the Shape entirely contains the specified rectangular area; false otherwise or, if the Shape contains the rectangular area and the intersects method returns true and the containment calculations would be too expensive to perform.
        Since:
        1.2
        See Also:
        Area, Shape.intersects(double, double, double, double)
      • getPathIterator

        public PathIterator getPathIterator(AffineTransform at)
        Returns an iteration object that defines the boundary of this RoundRectangle2D. The iterator for this class is multi-threaded safe, which means that this RoundRectangle2D class guarantees that modifications to the geometry of this RoundRectangle2D object do not affect any iterations of that geometry that are already in process.
        Parameters:
        at - an optional AffineTransform to be applied to the coordinates as they are returned in the iteration, or null if untransformed coordinates are desired
        Returns:
        the PathIterator object that returns the geometry of the outline of this RoundRectangle2D, one segment at a time.
        Since:
        1.2
      • equals

        public boolean equals(Object obj)
        Determines whether or not the specified Object is equal to this RoundRectangle2D. The specified Object is equal to this RoundRectangle2D if it is an instance of RoundRectangle2D and if its location, size, and corner arc dimensions are the same as this RoundRectangle2D.
        Overrides:
        equals in class Object
        Parameters:
        obj - an Object to be compared with this RoundRectangle2D.
        Returns:
        true if obj is an instance of RoundRectangle2D and has the same values; false otherwise.
        Since:
        1.6
        See Also:
        Object.hashCode(), HashMap


Content

Android Reference

Java basics

Java Enterprise Edition (EE)

Java Standard Edition (SE)

SQL

HTML

PHP

CSS

Java Script

MYSQL

JQUERY

VBS

REGEX

C

C++

C#

Design patterns

RFC (standard status)

RFC (proposed standard status)

RFC (draft standard status)

RFC (informational status)

RFC (experimental status)

RFC (best current practice status)

RFC (historic status)

RFC (unknown status)

IT dictionary

License.
All information of this service is derived from the free sources and is provided solely in the form of quotations. This service provides information and interfaces solely for the familiarization (not ownership) and under the "as is" condition.
Copyright 2016 © ELTASK.COM. All rights reserved.
Site is optimized for mobile devices.
Downloads: 3455 / . Delta: 0.03686 с