IT. Expert System.

Java Standard Edition (SE)

RowSet


compact2, compact3
javax.sql

Interface RowSet

  • All Superinterfaces:
    AutoCloseable, ResultSet, Wrapper
    All Known Subinterfaces:
    CachedRowSet, FilteredRowSet, JdbcRowSet, JoinRowSet, SyncResolver, WebRowSet


    public interface RowSet
    extends ResultSet
    The interface that adds support to the JDBC API for the JavaBeans™ component model. A rowset, which can be used as a JavaBeans component in a visual Bean development environment, can be created and configured at design time and executed at run time.

    The RowSet interface provides a set of JavaBeans properties that allow a RowSet instance to be configured to connect to a JDBC data source and read some data from the data source. A group of setter methods (setInt, setBytes, setString, and so on) provide a way to pass input parameters to a rowset's command property. This command is the SQL query the rowset uses when it gets its data from a relational database, which is generally the case.

    The RowSet interface supports JavaBeans events, allowing other components in an application to be notified when an event occurs on a rowset, such as a change in its value.

    The RowSet interface is unique in that it is intended to be implemented using the rest of the JDBC API. In other words, a RowSet implementation is a layer of software that executes "on top" of a JDBC driver. Implementations of the RowSet interface can be provided by anyone, including JDBC driver vendors who want to provide a RowSet implementation as part of their JDBC products.

    A RowSet object may make a connection with a data source and maintain that connection throughout its life cycle, in which case it is called a connected rowset. A rowset may also make a connection with a data source, get data from it, and then close the connection. Such a rowset is called a disconnected rowset. A disconnected rowset may make changes to its data while it is disconnected and then send the changes back to the original source of the data, but it must reestablish a connection to do so.

    A disconnected rowset may have a reader (a RowSetReader object) and a writer (a RowSetWriter object) associated with it. The reader may be implemented in many different ways to populate a rowset with data, including getting data from a non-relational data source. The writer can also be implemented in many different ways to propagate changes made to the rowset's data back to the underlying data source.

    Rowsets are easy to use. The RowSet interface extends the standard java.sql.ResultSet interface. The RowSetMetaData interface extends the java.sql.ResultSetMetaData interface. Thus, developers familiar with the JDBC API will have to learn a minimal number of new APIs to use rowsets. In addition, third-party software tools that work with JDBC ResultSet objects will also easily be made to work with rowsets.

    Since:
    1.4
    • Method Detail

      • getUrl

        String getUrl()
               throws SQLException
        Retrieves the url property this RowSet object will use to create a connection if it uses the DriverManager instead of a DataSource object to establish the connection. The default value is null.
        Returns:
        a string url
        Throws:
        SQLException - if a database access error occurs
        See Also:
        setUrl(java.lang.String)
      • setUrl

        void setUrl(String url)
             throws SQLException
        Sets the URL this RowSet object will use when it uses the DriverManager to create a connection. Setting this property is optional. If a URL is used, a JDBC driver that accepts the URL must be loaded before the rowset is used to connect to a database. The rowset will use the URL internally to create a database connection when reading or writing data. Either a URL or a data source name is used to create a connection, whichever was set to non null value most recently.
        Parameters:
        url - a string value; may be null
        Throws:
        SQLException - if a database access error occurs
        See Also:
        getUrl()
      • setDataSourceName

        void setDataSourceName(String name)
                        throws SQLException
        Sets the data source name property for this RowSet object to the given String.

        The value of the data source name property can be used to do a lookup of a DataSource object that has been registered with a naming service. After being retrieved, the DataSource object can be used to create a connection to the data source that it represents.

        Parameters:
        name - the logical name of the data source for this RowSet object; may be null
        Throws:
        SQLException - if a database access error occurs
        See Also:
        getDataSourceName()
      • getUsername

        String getUsername()
        Retrieves the username used to create a database connection for this RowSet object. The username property is set at run time before calling the method execute. It is not usually part of the serialized state of a RowSet object.
        Returns:
        the username property
        See Also:
        setUsername(java.lang.String)
      • setUsername

        void setUsername(String name)
                  throws SQLException
        Sets the username property for this RowSet object to the given String.
        Parameters:
        name - a user name
        Throws:
        SQLException - if a database access error occurs
        See Also:
        getUsername()
      • getPassword

        String getPassword()
        Retrieves the password used to create a database connection. The password property is set at run time before calling the method execute. It is not usually part of the serialized state of a RowSet object.
        Returns:
        the password for making a database connection
        See Also:
        setPassword(java.lang.String)
      • setPassword

        void setPassword(String password)
                  throws SQLException
        Sets the database password for this RowSet object to the given String.
        Parameters:
        password - the password string
        Throws:
        SQLException - if a database access error occurs
        See Also:
        getPassword()
      • getTransactionIsolation

        int getTransactionIsolation()
        Retrieves the transaction isolation level set for this RowSet object.
        Returns:
        the transaction isolation level; one of Connection.TRANSACTION_READ_UNCOMMITTED, Connection.TRANSACTION_READ_COMMITTED, Connection.TRANSACTION_REPEATABLE_READ, or Connection.TRANSACTION_SERIALIZABLE
        See Also:
        setTransactionIsolation(int)
      • setTransactionIsolation

        void setTransactionIsolation(int level)
                              throws SQLException
        Sets the transaction isolation level for this RowSet object.
        Parameters:
        level - the transaction isolation level; one of Connection.TRANSACTION_READ_UNCOMMITTED, Connection.TRANSACTION_READ_COMMITTED, Connection.TRANSACTION_REPEATABLE_READ, or Connection.TRANSACTION_SERIALIZABLE
        Throws:
        SQLException - if a database access error occurs
        See Also:
        getTransactionIsolation()
      • getTypeMap

        Map<String,Class<?>> getTypeMap()
                                 throws SQLException
        Retrieves the Map object associated with this RowSet object, which specifies the custom mapping of SQL user-defined types, if any. The default is for the type map to be empty.
        Returns:
        a java.util.Map object containing the names of SQL user-defined types and the Java classes to which they are to be mapped
        Throws:
        SQLException - if a database access error occurs
        See Also:
        setTypeMap(java.util.Map<java.lang.String, java.lang.Class<?>>)
      • setTypeMap

        void setTypeMap(Map<String,Class<?>> map)
                 throws SQLException
        Installs the given java.util.Map object as the default type map for this RowSet object. This type map will be used unless another type map is supplied as a method parameter.
        Parameters:
        map - a java.util.Map object containing the names of SQL user-defined types and the Java classes to which they are to be mapped
        Throws:
        SQLException - if a database access error occurs
        See Also:
        getTypeMap()
      • getCommand

        String getCommand()
        Retrieves this RowSet object's command property. The command property contains a command string, which must be an SQL query, that can be executed to fill the rowset with data. The default value is null.
        Returns:
        the command string; may be null
        See Also:
        setCommand(java.lang.String)
      • setCommand

        void setCommand(String cmd)
                 throws SQLException
        Sets this RowSet object's command property to the given SQL query. This property is optional when a rowset gets its data from a data source that does not support commands, such as a spreadsheet.
        Parameters:
        cmd - the SQL query that will be used to get the data for this RowSet object; may be null
        Throws:
        SQLException - if a database access error occurs
        See Also:
        getCommand()
      • isReadOnly

        boolean isReadOnly()
        Retrieves whether this RowSet object is read-only. If updates are possible, the default is for a rowset to be updatable.

        Attempts to update a read-only rowset will result in an SQLException being thrown.

        Returns:
        true if this RowSet object is read-only; false if it is updatable
        See Also:
        setReadOnly(boolean)
      • setReadOnly

        void setReadOnly(boolean value)
                  throws SQLException
        Sets whether this RowSet object is read-only to the given boolean.
        Parameters:
        value - true if read-only; false if updatable
        Throws:
        SQLException - if a database access error occurs
        See Also:
        isReadOnly()
      • getMaxFieldSize

        int getMaxFieldSize()
                     throws SQLException
        Retrieves the maximum number of bytes that may be returned for certain column values. This limit applies only to BINARY, VARBINARY, LONGVARBINARYBINARY, CHAR, VARCHAR, LONGVARCHAR, NCHAR and NVARCHAR columns. If the limit is exceeded, the excess data is silently discarded.
        Returns:
        the current maximum column size limit; zero means that there is no limit
        Throws:
        SQLException - if a database access error occurs
        See Also:
        setMaxFieldSize(int)
      • setMaxFieldSize

        void setMaxFieldSize(int max)
                      throws SQLException
        Sets the maximum number of bytes that can be returned for a column value to the given number of bytes. This limit applies only to BINARY, VARBINARY, LONGVARBINARYBINARY, CHAR, VARCHAR, LONGVARCHAR, NCHAR and NVARCHAR columns. If the limit is exceeded, the excess data is silently discarded. For maximum portability, use values greater than 256.
        Parameters:
        max - the new max column size limit in bytes; zero means unlimited
        Throws:
        SQLException - if a database access error occurs
        See Also:
        getMaxFieldSize()
      • getMaxRows

        int getMaxRows()
                throws SQLException
        Retrieves the maximum number of rows that this RowSet object can contain. If the limit is exceeded, the excess rows are silently dropped.
        Returns:
        the current maximum number of rows that this RowSet object can contain; zero means unlimited
        Throws:
        SQLException - if a database access error occurs
        See Also:
        setMaxRows(int)
      • setMaxRows

        void setMaxRows(int max)
                 throws SQLException
        Sets the maximum number of rows that this RowSet object can contain to the specified number. If the limit is exceeded, the excess rows are silently dropped.
        Parameters:
        max - the new maximum number of rows; zero means unlimited
        Throws:
        SQLException - if a database access error occurs
        See Also:
        getMaxRows()
      • getEscapeProcessing

        boolean getEscapeProcessing()
                             throws SQLException
        Retrieves whether escape processing is enabled for this RowSet object. If escape scanning is enabled, which is the default, the driver will do escape substitution before sending an SQL statement to the database.
        Returns:
        true if escape processing is enabled; false if it is disabled
        Throws:
        SQLException - if a database access error occurs
        See Also:
        setEscapeProcessing(boolean)
      • setEscapeProcessing

        void setEscapeProcessing(boolean enable)
                          throws SQLException
        Sets escape processing for this RowSet object on or off. If escape scanning is on (the default), the driver will do escape substitution before sending an SQL statement to the database.
        Parameters:
        enable - true to enable escape processing; false to disable it
        Throws:
        SQLException - if a database access error occurs
        See Also:
        getEscapeProcessing()
      • getQueryTimeout

        int getQueryTimeout()
                     throws SQLException
        Retrieves the maximum number of seconds the driver will wait for a statement to execute. If this limit is exceeded, an SQLException is thrown.
        Returns:
        the current query timeout limit in seconds; zero means unlimited
        Throws:
        SQLException - if a database access error occurs
        See Also:
        setQueryTimeout(int)
      • setQueryTimeout

        void setQueryTimeout(int seconds)
                      throws SQLException
        Sets the maximum time the driver will wait for a statement to execute to the given number of seconds. If this limit is exceeded, an SQLException is thrown.
        Parameters:
        seconds - the new query timeout limit in seconds; zero means that there is no limit
        Throws:
        SQLException - if a database access error occurs
        See Also:
        getQueryTimeout()
      • setType

        void setType(int type)
              throws SQLException
        Sets the type of this RowSet object to the given type. This method is used to change the type of a rowset, which is by default read-only and non-scrollable.
        Parameters:
        type - one of the ResultSet constants specifying a type: ResultSet.TYPE_FORWARD_ONLY, ResultSet.TYPE_SCROLL_INSENSITIVE, or ResultSet.TYPE_SCROLL_SENSITIVE
        Throws:
        SQLException - if a database access error occurs
        See Also:
        ResultSet.getType()
      • setConcurrency

        void setConcurrency(int concurrency)
                     throws SQLException
        Sets the concurrency of this RowSet object to the given concurrency level. This method is used to change the concurrency level of a rowset, which is by default ResultSet.CONCUR_READ_ONLY
        Parameters:
        concurrency - one of the ResultSet constants specifying a concurrency level: ResultSet.CONCUR_READ_ONLY or ResultSet.CONCUR_UPDATABLE
        Throws:
        SQLException - if a database access error occurs
        See Also:
        ResultSet.getConcurrency()
      • setNull

        void setNull(int parameterIndex,
                     int sqlType)
              throws SQLException
        Sets the designated parameter in this RowSet object's SQL command to SQL NULL.

        Note: You must specify the parameter's SQL type.

        Parameters:
        parameterIndex - the first parameter is 1, the second is 2, ...
        sqlType - a SQL type code defined by java.sql.Types
        Throws:
        SQLException - if a database access error occurs
      • setNull

        void setNull(String parameterName,
                     int sqlType)
              throws SQLException
        Sets the designated parameter to SQL NULL.

        Note: You must specify the parameter's SQL type.

        Parameters:
        parameterName - the name of the parameter
        sqlType - the SQL type code defined in java.sql.Types
        Throws:
        SQLException - if a database access error occurs or this method is called on a closed CallableStatement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        1.4
      • setNull

        void setNull(int paramIndex,
                     int sqlType,
                     String typeName)
              throws SQLException
        Sets the designated parameter in this RowSet object's SQL command to SQL NULL. This version of the method setNull should be used for SQL user-defined types (UDTs) and REF type parameters. Examples of UDTs include: STRUCT, DISTINCT, JAVA_OBJECT, and named array types.

        Note: To be portable, applications must give the SQL type code and the fully qualified SQL type name when specifying a NULL UDT or REF parameter. In the case of a UDT, the name is the type name of the parameter itself. For a REF parameter, the name is the type name of the referenced type. If a JDBC driver does not need the type code or type name information, it may ignore it. Although it is intended for UDT and REF parameters, this method may be used to set a null parameter of any JDBC type. If the parameter does not have a user-defined or REF type, the typeName parameter is ignored.

        Parameters:
        paramIndex - the first parameter is 1, the second is 2, ...
        sqlType - a value from java.sql.Types
        typeName - the fully qualified name of an SQL UDT or the type name of the SQL structured type being referenced by a REF type; ignored if the parameter is not a UDT or REF type
        Throws:
        SQLException - if a database access error occurs
      • setNull

        void setNull(String parameterName,
                     int sqlType,
                     String typeName)
              throws SQLException
        Sets the designated parameter to SQL NULL. This version of the method setNull should be used for user-defined types and REF type parameters. Examples of user-defined types include: STRUCT, DISTINCT, JAVA_OBJECT, and named array types.

        Note: To be portable, applications must give the SQL type code and the fully-qualified SQL type name when specifying a NULL user-defined or REF parameter. In the case of a user-defined type the name is the type name of the parameter itself. For a REF parameter, the name is the type name of the referenced type. If a JDBC driver does not need the type code or type name information, it may ignore it. Although it is intended for user-defined and Ref parameters, this method may be used to set a null parameter of any JDBC type. If the parameter does not have a user-defined or REF type, the given typeName is ignored.

        Parameters:
        parameterName - the name of the parameter
        sqlType - a value from java.sql.Types
        typeName - the fully-qualified name of an SQL user-defined type; ignored if the parameter is not a user-defined type or SQL REF value
        Throws:
        SQLException - if a database access error occurs or this method is called on a closed CallableStatement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        1.4
      • setBoolean

        void setBoolean(int parameterIndex,
                        boolean x)
                 throws SQLException
        Sets the designated parameter in this RowSet object's command to the given Java boolean value. The driver converts this to an SQL BIT value before sending it to the database.
        Parameters:
        parameterIndex - the first parameter is 1, the second is 2, ...
        x - the parameter value
        Throws:
        SQLException - if a database access error occurs
      • setBoolean

        void setBoolean(String parameterName,
                        boolean x)
                 throws SQLException
        Sets the designated parameter to the given Java boolean value. The driver converts this to an SQL BIT or BOOLEAN value when it sends it to the database.
        Parameters:
        parameterName - the name of the parameter
        x - the parameter value
        Throws:
        SQLException - if a database access error occurs or this method is called on a closed CallableStatement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        1.4
        See Also:
        ResultSet.getBoolean(int)
      • setByte

        void setByte(int parameterIndex,
                     byte x)
              throws SQLException
        Sets the designated parameter in this RowSet object's command to the given Java byte value. The driver converts this to an SQL TINYINT value before sending it to the database.
        Parameters:
        parameterIndex - the first parameter is 1, the second is 2, ...
        x - the parameter value
        Throws:
        SQLException - if a database access error occurs
      • setByte

        void setByte(String parameterName,
                     byte x)
              throws SQLException
        Sets the designated parameter to the given Java byte value. The driver converts this to an SQL TINYINT value when it sends it to the database.
        Parameters:
        parameterName - the name of the parameter
        x - the parameter value
        Throws:
        SQLException - if a database access error occurs or this method is called on a closed CallableStatement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        1.4
        See Also:
        ResultSet.getByte(int)
      • setShort

        void setShort(int parameterIndex,
                      short x)
               throws SQLException
        Sets the designated parameter in this RowSet object's command to the given Java short value. The driver converts this to an SQL SMALLINT value before sending it to the database.
        Parameters:
        parameterIndex - the first parameter is 1, the second is 2, ...
        x - the parameter value
        Throws:
        SQLException - if a database access error occurs
      • setShort

        void setShort(String parameterName,
                      short x)
               throws SQLException
        Sets the designated parameter to the given Java short value. The driver converts this to an SQL SMALLINT value when it sends it to the database.
        Parameters:
        parameterName - the name of the parameter
        x - the parameter value
        Throws:
        SQLException - if a database access error occurs or this method is called on a closed CallableStatement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        1.4
        See Also:
        ResultSet.getShort(int)
      • setInt

        void setInt(int parameterIndex,
                    int x)
             throws SQLException
        Sets the designated parameter in this RowSet object's command to the given Java int value. The driver converts this to an SQL INTEGER value before sending it to the database.
        Parameters:
        parameterIndex - the first parameter is 1, the second is 2, ...
        x - the parameter value
        Throws:
        SQLException - if a database access error occurs
      • setInt

        void setInt(String parameterName,
                    int x)
             throws SQLException
        Sets the designated parameter to the given Java int value. The driver converts this to an SQL INTEGER value when it sends it to the database.
        Parameters:
        parameterName - the name of the parameter
        x - the parameter value
        Throws:
        SQLException - if a database access error occurs or this method is called on a closed CallableStatement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        1.4
        See Also:
        ResultSet.getInt(int)
      • setLong

        void setLong(int parameterIndex,
                     long x)
              throws SQLException
        Sets the designated parameter in this RowSet object's command to the given Java long value. The driver converts this to an SQL BIGINT value before sending it to the database.
        Parameters:
        parameterIndex - the first parameter is 1, the second is 2, ...
        x - the parameter value
        Throws:
        SQLException - if a database access error occurs
      • setLong

        void setLong(String parameterName,
                     long x)
              throws SQLException
        Sets the designated parameter to the given Java long value. The driver converts this to an SQL BIGINT value when it sends it to the database.
        Parameters:
        parameterName - the name of the parameter
        x - the parameter value
        Throws:
        SQLException - if a database access error occurs or this method is called on a closed CallableStatement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        1.4
        See Also:
        ResultSet.getLong(int)
      • setFloat

        void setFloat(int parameterIndex,
                      float x)
               throws SQLException
        Sets the designated parameter in this RowSet object's command to the given Java float value. The driver converts this to an SQL REAL value before sending it to the database.
        Parameters:
        parameterIndex - the first parameter is 1, the second is 2, ...
        x - the parameter value
        Throws:
        SQLException - if a database access error occurs
      • setFloat

        void setFloat(String parameterName,
                      float x)
               throws SQLException
        Sets the designated parameter to the given Java float value. The driver converts this to an SQL FLOAT value when it sends it to the database.
        Parameters:
        parameterName - the name of the parameter
        x - the parameter value
        Throws:
        SQLException - if a database access error occurs or this method is called on a closed CallableStatement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        1.4
        See Also:
        ResultSet.getFloat(int)
      • setDouble

        void setDouble(int parameterIndex,
                       double x)
                throws SQLException
        Sets the designated parameter in this RowSet object's command to the given Java double value. The driver converts this to an SQL DOUBLE value before sending it to the database.
        Parameters:
        parameterIndex - the first parameter is 1, the second is 2, ...
        x - the parameter value
        Throws:
        SQLException - if a database access error occurs
      • setDouble

        void setDouble(String parameterName,
                       double x)
                throws SQLException
        Sets the designated parameter to the given Java double value. The driver converts this to an SQL DOUBLE value when it sends it to the database.
        Parameters:
        parameterName - the name of the parameter
        x - the parameter value
        Throws:
        SQLException - if a database access error occurs or this method is called on a closed CallableStatement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        1.4
        See Also:
        ResultSet.getDouble(int)
      • setBigDecimal

        void setBigDecimal(int parameterIndex,
                           BigDecimal x)
                    throws SQLException
        Sets the designated parameter in this RowSet object's command to the given java.math.BigDeciaml value. The driver converts this to an SQL NUMERIC value before sending it to the database.
        Parameters:
        parameterIndex - the first parameter is 1, the second is 2, ...
        x - the parameter value
        Throws:
        SQLException - if a database access error occurs
      • setBigDecimal

        void setBigDecimal(String parameterName,
                           BigDecimal x)
                    throws SQLException
        Sets the designated parameter to the given java.math.BigDecimal value. The driver converts this to an SQL NUMERIC value when it sends it to the database.
        Parameters:
        parameterName - the name of the parameter
        x - the parameter value
        Throws:
        SQLException - if a database access error occurs or this method is called on a closed CallableStatement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        1.4
        See Also:
        ResultSet.getBigDecimal(int, int)
      • setString

        void setString(int parameterIndex,
                       String x)
                throws SQLException
        Sets the designated parameter in this RowSet object's command to the given Java String value. Before sending it to the database, the driver converts this to an SQL VARCHAR or LONGVARCHAR value, depending on the argument's size relative to the driver's limits on VARCHAR values.
        Parameters:
        parameterIndex - the first parameter is 1, the second is 2, ...
        x - the parameter value
        Throws:
        SQLException - if a database access error occurs
      • setString

        void setString(String parameterName,
                       String x)
                throws SQLException
        Sets the designated parameter to the given Java String value. The driver converts this to an SQL VARCHAR or LONGVARCHAR value (depending on the argument's size relative to the driver's limits on VARCHAR values) when it sends it to the database.
        Parameters:
        parameterName - the name of the parameter
        x - the parameter value
        Throws:
        SQLException - if a database access error occurs or this method is called on a closed CallableStatement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        1.4
        See Also:
        ResultSet.getString(int)
      • setBytes

        void setBytes(int parameterIndex,
                      byte[] x)
               throws SQLException
        Sets the designated parameter in this RowSet object's command to the given Java array of byte values. Before sending it to the database, the driver converts this to an SQL VARBINARY or LONGVARBINARY value, depending on the argument's size relative to the driver's limits on VARBINARY values.
        Parameters:
        parameterIndex - the first parameter is 1, the second is 2, ...
        x - the parameter value
        Throws:
        SQLException - if a database access error occurs
      • setBytes

        void setBytes(String parameterName,
                      byte[] x)
               throws SQLException
        Sets the designated parameter to the given Java array of bytes. The driver converts this to an SQL VARBINARY or LONGVARBINARY (depending on the argument's size relative to the driver's limits on VARBINARY values) when it sends it to the database.
        Parameters:
        parameterName - the name of the parameter
        x - the parameter value
        Throws:
        SQLException - if a database access error occurs or this method is called on a closed CallableStatement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        1.4
        See Also:
        ResultSet.getBytes(int)
      • setDate

        void setDate(int parameterIndex,
                     Date x)
              throws SQLException
        Sets the designated parameter in this RowSet object's command to the given java.sql.Date value. The driver converts this to an SQL DATE value before sending it to the database, using the default java.util.Calendar to calculate the date.
        Parameters:
        parameterIndex - the first parameter is 1, the second is 2, ...
        x - the parameter value
        Throws:
        SQLException - if a database access error occurs
      • setTime

        void setTime(int parameterIndex,
                     Time x)
              throws SQLException
        Sets the designated parameter in this RowSet object's command to the given java.sql.Time value. The driver converts this to an SQL TIME value before sending it to the database, using the default java.util.Calendar to calculate it.
        Parameters:
        parameterIndex - the first parameter is 1, the second is 2, ...
        x - the parameter value
        Throws:
        SQLException - if a database access error occurs
      • setTimestamp

        void setTimestamp(int parameterIndex,
                          Timestamp x)
                   throws SQLException
        Sets the designated parameter in this RowSet object's command to the given java.sql.Timestamp value. The driver converts this to an SQL TIMESTAMP value before sending it to the database, using the default java.util.Calendar to calculate it.
        Parameters:
        parameterIndex - the first parameter is 1, the second is 2, ...
        x - the parameter value
        Throws:
        SQLException - if a database access error occurs
      • setTimestamp

        void setTimestamp(String parameterName,
                          Timestamp x)
                   throws SQLException
        Sets the designated parameter to the given java.sql.Timestamp value. The driver converts this to an SQL TIMESTAMP value when it sends it to the database.
        Parameters:
        parameterName - the name of the parameter
        x - the parameter value
        Throws:
        SQLException - if a database access error occurs or this method is called on a closed CallableStatement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        1.4
        See Also:
        ResultSet.getTimestamp(int)
      • setAsciiStream

        void setAsciiStream(int parameterIndex,
                            InputStream x,
                            int length)
                     throws SQLException
        Sets the designated parameter in this RowSet object's command to the given java.io.InputStream value. It may be more practical to send a very large ASCII value via a java.io.InputStream rather than as a LONGVARCHAR parameter. The driver will read the data from the stream as needed until it reaches end-of-file.

        Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

        Parameters:
        parameterIndex - the first parameter is 1, the second is 2, ...
        x - the Java input stream that contains the ASCII parameter value
        length - the number of bytes in the stream
        Throws:
        SQLException - if a database access error occurs
      • setAsciiStream

        void setAsciiStream(String parameterName,
                            InputStream x,
                            int length)
                     throws SQLException
        Sets the designated parameter to the given input stream, which will have the specified number of bytes. When a very large ASCII value is input to a LONGVARCHAR parameter, it may be more practical to send it via a java.io.InputStream. Data will be read from the stream as needed until end-of-file is reached. The JDBC driver will do any necessary conversion from ASCII to the database char format.

        Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

        Parameters:
        parameterName - the name of the parameter
        x - the Java input stream that contains the ASCII parameter value
        length - the number of bytes in the stream
        Throws:
        SQLException - if a database access error occurs or this method is called on a closed CallableStatement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        1.4
      • setBinaryStream

        void setBinaryStream(int parameterIndex,
                             InputStream x,
                             int length)
                      throws SQLException
        Sets the designated parameter in this RowSet object's command to the given java.io.InputStream value. It may be more practical to send a very large binary value via a java.io.InputStream rather than as a LONGVARBINARY parameter. The driver will read the data from the stream as needed until it reaches end-of-file.

        Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

        Parameters:
        parameterIndex - the first parameter is 1, the second is 2, ...
        x - the java input stream which contains the binary parameter value
        length - the number of bytes in the stream
        Throws:
        SQLException - if a database access error occurs
      • setBinaryStream

        void setBinaryStream(String parameterName,
                             InputStream x,
                             int length)
                      throws SQLException
        Sets the designated parameter to the given input stream, which will have the specified number of bytes. When a very large binary value is input to a LONGVARBINARY parameter, it may be more practical to send it via a java.io.InputStream object. The data will be read from the stream as needed until end-of-file is reached.

        Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

        Parameters:
        parameterName - the name of the parameter
        x - the java input stream which contains the binary parameter value
        length - the number of bytes in the stream
        Throws:
        SQLException - if a database access error occurs or this method is called on a closed CallableStatement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        1.4
      • setCharacterStream

        void setCharacterStream(int parameterIndex,
                                Reader reader,
                                int length)
                         throws SQLException
        Sets the designated parameter in this RowSet object's command to the given java.io.Reader value. It may be more practical to send a very large UNICODE value via a java.io.Reader rather than as a LONGVARCHAR parameter. The driver will read the data from the stream as needed until it reaches end-of-file.

        Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

        Parameters:
        parameterIndex - the first parameter is 1, the second is 2, ...
        reader - the Reader object that contains the UNICODE data to be set
        length - the number of characters in the stream
        Throws:
        SQLException - if a database access error occurs
      • setCharacterStream

        void setCharacterStream(String parameterName,
                                Reader reader,
                                int length)
                         throws SQLException
        Sets the designated parameter to the given Reader object, which is the given number of characters long. When a very large UNICODE value is input to a LONGVARCHAR parameter, it may be more practical to send it via a java.io.Reader object. The data will be read from the stream as needed until end-of-file is reached. The JDBC driver will do any necessary conversion from UNICODE to the database char format.

        Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

        Parameters:
        parameterName - the name of the parameter
        reader - the java.io.Reader object that contains the UNICODE data used as the designated parameter
        length - the number of characters in the stream
        Throws:
        SQLException - if a database access error occurs or this method is called on a closed CallableStatement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        1.4
      • setAsciiStream

        void setAsciiStream(int parameterIndex,
                            InputStream x)
                     throws SQLException
        Sets the designated parameter in this RowSet object's command to the given input stream. When a very large ASCII value is input to a LONGVARCHAR parameter, it may be more practical to send it via a java.io.InputStream. Data will be read from the stream as needed until end-of-file is reached. The JDBC driver will do any necessary conversion from ASCII to the database char format.

        Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

        Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setAsciiStream which takes a length parameter.

        Parameters:
        parameterIndex - the first parameter is 1, the second is 2, ...
        x - the Java input stream that contains the ASCII parameter value
        Throws:
        SQLException - if a database access error occurs or this method is called on a closed PreparedStatement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        1.6
      • setAsciiStream

        void setAsciiStream(String parameterName,
                            InputStream x)
                     throws SQLException
        Sets the designated parameter to the given input stream. When a very large ASCII value is input to a LONGVARCHAR parameter, it may be more practical to send it via a java.io.InputStream. Data will be read from the stream as needed until end-of-file is reached. The JDBC driver will do any necessary conversion from ASCII to the database char format.

        Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

        Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setAsciiStream which takes a length parameter.

        Parameters:
        parameterName - the name of the parameter
        x - the Java input stream that contains the ASCII parameter value
        Throws:
        SQLException - if a database access error occurs or this method is called on a closed CallableStatement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        1.6
      • setBinaryStream

        void setBinaryStream(int parameterIndex,
                             InputStream x)
                      throws SQLException
        Sets the designated parameter in this RowSet object's command to the given input stream. When a very large binary value is input to a LONGVARBINARY parameter, it may be more practical to send it via a java.io.InputStream object. The data will be read from the stream as needed until end-of-file is reached.

        Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

        Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setBinaryStream which takes a length parameter.

        Parameters:
        parameterIndex - the first parameter is 1, the second is 2, ...
        x - the java input stream which contains the binary parameter value
        Throws:
        SQLException - if a database access error occurs or this method is called on a closed PreparedStatement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        1.6
      • setBinaryStream

        void setBinaryStream(String parameterName,
                             InputStream x)
                      throws SQLException
        Sets the designated parameter to the given input stream. When a very large binary value is input to a LONGVARBINARY parameter, it may be more practical to send it via a java.io.InputStream object. The data will be read from the stream as needed until end-of-file is reached.

        Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

        Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setBinaryStream which takes a length parameter.

        Parameters:
        parameterName - the name of the parameter
        x - the java input stream which contains the binary parameter value
        Throws:
        SQLException - if a database access error occurs or this method is called on a closed CallableStatement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        1.6
      • setCharacterStream

        void setCharacterStream(int parameterIndex,
                                Reader reader)
                         throws SQLException
        Sets the designated parameter in this RowSet object's command to the given Reader object. When a very large UNICODE value is input to a LONGVARCHAR parameter, it may be more practical to send it via a java.io.Reader object. The data will be read from the stream as needed until end-of-file is reached. The JDBC driver will do any necessary conversion from UNICODE to the database char format.

        Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

        Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setCharacterStream which takes a length parameter.

        Parameters:
        parameterIndex - the first parameter is 1, the second is 2, ...
        reader - the java.io.Reader object that contains the Unicode data
        Throws:
        SQLException - if a database access error occurs or this method is called on a closed PreparedStatement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        1.6
      • setCharacterStream

        void setCharacterStream(String parameterName,
                                Reader reader)
                         throws SQLException
        Sets the designated parameter to the given Reader object. When a very large UNICODE value is input to a LONGVARCHAR parameter, it may be more practical to send it via a java.io.Reader object. The data will be read from the stream as needed until end-of-file is reached. The JDBC driver will do any necessary conversion from UNICODE to the database char format.

        Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

        Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setCharacterStream which takes a length parameter.

        Parameters:
        parameterName - the name of the parameter
        reader - the java.io.Reader object that contains the Unicode data
        Throws:
        SQLException - if a database access error occurs or this method is called on a closed CallableStatement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        1.6
      • setNCharacterStream

        void setNCharacterStream(int parameterIndex,
                                 Reader value)
                          throws SQLException
        Sets the designated parameter in this RowSet object's command to a Reader object. The Reader reads the data till end-of-file is reached. The driver does the necessary conversion from Java character format to the national character set in the database.

        Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

        Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setNCharacterStream which takes a length parameter.

        Parameters:
        parameterIndex - of the first parameter is 1, the second is 2, ...
        value - the parameter value
        Throws:
        SQLException - if the driver does not support national character sets; if the driver can detect that a data conversion error could occur ; if a database access error occurs; or this method is called on a closed PreparedStatement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        1.6
      • setObject

        void setObject(int parameterIndex,
                       Object x,
                       int targetSqlType,
                       int scaleOrLength)
                throws SQLException
        Sets the designated parameter in this RowSet object's command with the given Java Object. For integral values, the java.lang equivalent objects should be used (for example, an instance of the class Integer for an int). If the second argument is an InputStream then the stream must contain the number of bytes specified by scaleOrLength. If the second argument is a Reader then the reader must contain the number of characters specified * by scaleOrLength. If these conditions are not true the driver will generate a SQLException when the prepared statement is executed.

        The given Java object will be converted to the targetSqlType before being sent to the database.

        If the object is of a class implementing SQLData, the rowset should call the method SQLData.writeSQL to write the object to an SQLOutput data stream. If, on the other hand, the object is of a class implementing Ref, Blob, Clob, NClob, Struct, java.net.URL, or Array, the driver should pass it to the database as a value of the corresponding SQL type.

        Note that this method may be used to pass datatabase-specific abstract data types.

        Parameters:
        parameterIndex - the first parameter is 1, the second is 2, ...
        x - the object containing the input parameter value
        targetSqlType - the SQL type (as defined in java.sql.Types) to be sent to the database. The scale argument may further qualify this type.
        scaleOrLength - for java.sql.Types.DECIMAL or java.sql.Types.NUMERIC types, this is the number of digits after the decimal point. For Java Object types InputStream and Reader, this is the length of the data in the stream or reader. For all other types, this value will be ignored.
        Throws:
        SQLException - if a database access error occurs
        See Also:
        Types
      • setObject

        void setObject(String parameterName,
                       Object x,
                       int targetSqlType,
                       int scale)
                throws SQLException
        Sets the value of the designated parameter with the given object. The second argument must be an object type; for integral values, the java.lang equivalent objects should be used.

        The given Java object will be converted to the given targetSqlType before being sent to the database. If the object has a custom mapping (is of a class implementing the interface SQLData), the JDBC driver should call the method SQLData.writeSQL to write it to the SQL data stream. If, on the other hand, the object is of a class implementing Ref, Blob, Clob, NClob, Struct, java.net.URL, or Array, the driver should pass it to the database as a value of the corresponding SQL type.

        Note that this method may be used to pass datatabase- specific abstract data types.

        Parameters:
        parameterName - the name of the parameter
        x - the object containing the input parameter value
        targetSqlType - the SQL type (as defined in java.sql.Types) to be sent to the database. The scale argument may further qualify this type.
        scale - for java.sql.Types.DECIMAL or java.sql.Types.NUMERIC types, this is the number of digits after the decimal point. For all other types, this value will be ignored.
        Throws:
        SQLException - if a database access error occurs or this method is called on a closed CallableStatement
        SQLFeatureNotSupportedException - if targetSqlType is a ARRAY, BLOB, CLOB, DATALINK, JAVA_OBJECT, NCHAR, NCLOB, NVARCHAR, LONGNVARCHAR, REF, ROWID, SQLXML or STRUCT data type and the JDBC driver does not support this data type
        Since:
        1.4
        See Also:
        Types, ResultSet.getObject(int)
      • setObject

        void setObject(int parameterIndex,
                       Object x,
                       int targetSqlType)
                throws SQLException
        Sets the designated parameter in this RowSet object's command with a Java Object. For integral values, the java.lang equivalent objects should be used. This method is like setObject above, but the scale used is the scale of the second parameter. Scalar values have a scale of zero. Literal values have the scale present in the literal.

        Even though it is supported, it is not recommended that this method be called with floating point input values.

        Parameters:
        parameterIndex - the first parameter is 1, the second is 2, ...
        x - the object containing the input parameter value
        targetSqlType - the SQL type (as defined in java.sql.Types) to be sent to the database
        Throws:
        SQLException - if a database access error occurs
      • setObject

        void setObject(String parameterName,
                       Object x,
                       int targetSqlType)
                throws SQLException
        Sets the value of the designated parameter with the given object. This method is like the method setObject above, except that it assumes a scale of zero.
        Parameters:
        parameterName - the name of the parameter
        x - the object containing the input parameter value
        targetSqlType - the SQL type (as defined in java.sql.Types) to be sent to the database
        Throws:
        SQLException - if a database access error occurs or this method is called on a closed CallableStatement
        SQLFeatureNotSupportedException - if targetSqlType is a ARRAY, BLOB, CLOB, DATALINK, JAVA_OBJECT, NCHAR, NCLOB, NVARCHAR, LONGNVARCHAR, REF, ROWID, SQLXML or STRUCT data type and the JDBC driver does not support this data type
        Since:
        1.4
        See Also:
        ResultSet.getObject(int)
      • setObject

        void setObject(String parameterName,
                       Object x)
                throws SQLException
        Sets the value of the designated parameter with the given object. The second parameter must be of type Object; therefore, the java.lang equivalent objects should be used for built-in types.

        The JDBC specification specifies a standard mapping from Java Object types to SQL types. The given argument will be converted to the corresponding SQL type before being sent to the database.

        Note that this method may be used to pass datatabase- specific abstract data types, by using a driver-specific Java type. If the object is of a class implementing the interface SQLData, the JDBC driver should call the method SQLData.writeSQL to write it to the SQL data stream. If, on the other hand, the object is of a class implementing Ref, Blob, Clob, NClob, Struct, java.net.URL, or Array, the driver should pass it to the database as a value of the corresponding SQL type.

        This method throws an exception if there is an ambiguity, for example, if the object is of a class implementing more than one of the interfaces named above.

        Parameters:
        parameterName - the name of the parameter
        x - the object containing the input parameter value
        Throws:
        SQLException - if a database access error occurs, this method is called on a closed CallableStatement or if the given Object parameter is ambiguous
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        1.4
        See Also:
        ResultSet.getObject(int)
      • setObject

        void setObject(int parameterIndex,
                       Object x)
                throws SQLException
        Sets the designated parameter in this RowSet object's command with a Java Object. For integral values, the java.lang equivalent objects should be used.

        The JDBC specification provides a standard mapping from Java Object types to SQL types. The driver will convert the given Java object to its standard SQL mapping before sending it to the database.

        Note that this method may be used to pass datatabase-specific abstract data types by using a driver-specific Java type. If the object is of a class implementing SQLData, the rowset should call the method SQLData.writeSQL to write the object to an SQLOutput data stream. If, on the other hand, the object is of a class implementing Ref, Blob, Clob, NClob, Struct, java.net.URL, or Array, the driver should pass it to the database as a value of the corresponding SQL type.

        An exception is thrown if there is an ambiguity, for example, if the object is of a class implementing more than one of these interfaces.

        Parameters:
        parameterIndex - The first parameter is 1, the second is 2, ...
        x - The object containing the input parameter value
        Throws:
        SQLException - if a database access error occurs
      • setRef

        void setRef(int i,
                    Ref x)
             throws SQLException
        Sets the designated parameter in this RowSet object's command with the given Ref value. The driver will convert this to the appropriate REF(<structured-type>) value.
        Parameters:
        i - the first parameter is 1, the second is 2, ...
        x - an object representing data of an SQL REF type
        Throws:
        SQLException - if a database access error occurs
      • setBlob

        void setBlob(int i,
                     Blob x)
              throws SQLException
        Sets the designated parameter in this RowSet object's command with the given Blob value. The driver will convert this to the BLOB value that the Blob object represents before sending it to the database.
        Parameters:
        i - the first parameter is 1, the second is 2, ...
        x - an object representing a BLOB
        Throws:
        SQLException - if a database access error occurs
      • setBlob

        void setBlob(int parameterIndex,
                     InputStream inputStream,
                     long length)
              throws SQLException
        Sets the designated parameter to a InputStream object. The inputstream must contain the number of characters specified by length otherwise a SQLException will be generated when the PreparedStatement is executed. This method differs from the setBinaryStream (int, InputStream, int) method because it informs the driver that the parameter value should be sent to the server as a BLOB. When the setBinaryStream method is used, the driver may have to do extra work to determine whether the parameter data should be sent to the server as a LONGVARBINARY or a BLOB
        Parameters:
        parameterIndex - index of the first parameter is 1, the second is 2, ...
        inputStream - An object that contains the data to set the parameter value to.
        length - the number of bytes in the parameter data.
        Throws:
        SQLException - if a database access error occurs, this method is called on a closed PreparedStatement, if parameterIndex does not correspond to a parameter marker in the SQL statement, if the length specified is less than zero or if the number of bytes in the inputstream does not match the specified length.
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        1.6
      • setBlob

        void setBlob(int parameterIndex,
                     InputStream inputStream)
              throws SQLException
        Sets the designated parameter to a InputStream object. This method differs from the setBinaryStream (int, InputStream) method because it informs the driver that the parameter value should be sent to the server as a BLOB. When the setBinaryStream method is used, the driver may have to do extra work to determine whether the parameter data should be sent to the server as a LONGVARBINARY or a BLOB

        Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setBlob which takes a length parameter.

        Parameters:
        parameterIndex - index of the first parameter is 1, the second is 2, ...
        inputStream - An object that contains the data to set the parameter value to.
        Throws:
        SQLException - if a database access error occurs, this method is called on a closed PreparedStatement or if parameterIndex does not correspond to a parameter marker in the SQL statement,
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        1.6
      • setBlob

        void setBlob(String parameterName,
                     InputStream inputStream,
                     long length)
              throws SQLException
        Sets the designated parameter to a InputStream object. The inputstream must contain the number of characters specified by length, otherwise a SQLException will be generated when the CallableStatement is executed. This method differs from the setBinaryStream (int, InputStream, int) method because it informs the driver that the parameter value should be sent to the server as a BLOB. When the setBinaryStream method is used, the driver may have to do extra work to determine whether the parameter data should be sent to the server as a LONGVARBINARY or a BLOB
        Parameters:
        parameterName - the name of the parameter to be set the second is 2, ...
        inputStream - An object that contains the data to set the parameter value to.
        length - the number of bytes in the parameter data.
        Throws:
        SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement, or if the length specified is less than zero; if the number of bytes in the inputstream does not match the specified length; if a database access error occurs or this method is called on a closed CallableStatement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        1.6
      • setBlob

        void setBlob(String parameterName,
                     Blob x)
              throws SQLException
        Sets the designated parameter to the given java.sql.Blob object. The driver converts this to an SQL BLOB value when it sends it to the database.
        Parameters:
        parameterName - the name of the parameter
        x - a Blob object that maps an SQL BLOB value
        Throws:
        SQLException - if a database access error occurs or this method is called on a closed CallableStatement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        1.6
      • setBlob

        void setBlob(String parameterName,
                     InputStream inputStream)
              throws SQLException
        Sets the designated parameter to a InputStream object. This method differs from the setBinaryStream (int, InputStream) method because it informs the driver that the parameter value should be sent to the server as a BLOB. When the setBinaryStream method is used, the driver may have to do extra work to determine whether the parameter data should be send to the server as a LONGVARBINARY or a BLOB

        Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setBlob which takes a length parameter.

        Parameters:
        parameterName - the name of the parameter
        inputStream - An object that contains the data to set the parameter value to.
        Throws:
        SQLException - if a database access error occurs or this method is called on a closed CallableStatement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        1.6
      • setClob

        void setClob(int i,
                     Clob x)
              throws SQLException
        Sets the designated parameter in this RowSet object's command with the given Clob value. The driver will convert this to the CLOB value that the Clob object represents before sending it to the database.
        Parameters:
        i - the first parameter is 1, the second is 2, ...
        x - an object representing a CLOB
        Throws:
        SQLException - if a database access error occurs
      • setClob

        void setClob(int parameterIndex,
                     Reader reader,
                     long length)
              throws SQLException
        Sets the designated parameter to a Reader object. The reader must contain the number of characters specified by length otherwise a SQLException will be generated when the PreparedStatement is executed. This method differs from the setCharacterStream (int, Reader, int) method because it informs the driver that the parameter value should be sent to the server as a CLOB. When the setCharacterStream method is used, the driver may have to do extra work to determine whether the parameter data should be sent to the server as a LONGVARCHAR or a CLOB
        Parameters:
        parameterIndex - index of the first parameter is 1, the second is 2, ...
        reader - An object that contains the data to set the parameter value to.
        length - the number of characters in the parameter data.
        Throws:
        SQLException - if a database access error occurs, this method is called on a closed PreparedStatement, if parameterIndex does not correspond to a parameter marker in the SQL statement, or if the length specified is less than zero.
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        1.6
      • setClob

        void setClob(int parameterIndex,
                     Reader reader)
              throws SQLException
        Sets the designated parameter to a Reader object. This method differs from the setCharacterStream (int, Reader) method because it informs the driver that the parameter value should be sent to the server as a CLOB. When the setCharacterStream method is used, the driver may have to do extra work to determine whether the parameter data should be sent to the server as a LONGVARCHAR or a CLOB

        Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setClob which takes a length parameter.

        Parameters:
        parameterIndex - index of the first parameter is 1, the second is 2, ...
        reader - An object that contains the data to set the parameter value to.
        Throws:
        SQLException - if a database access error occurs, this method is called on a closed PreparedStatementor if parameterIndex does not correspond to a parameter marker in the SQL statement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        1.6
      • setClob

        void setClob(String parameterName,
                     Reader reader,
                     long length)
              throws SQLException
        Sets the designated parameter to a Reader object. The reader must contain the number of characters specified by length otherwise a SQLException will be generated when the CallableStatement is executed. This method differs from the setCharacterStream (int, Reader, int) method because it informs the driver that the parameter value should be sent to the server as a CLOB. When the setCharacterStream method is used, the driver may have to do extra work to determine whether the parameter data should be send to the server as a LONGVARCHAR or a CLOB
        Parameters:
        parameterName - the name of the parameter to be set
        reader - An object that contains the data to set the parameter value to.
        length - the number of characters in the parameter data.
        Throws:
        SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if the length specified is less than zero; a database access error occurs or this method is called on a closed CallableStatement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        1.6
      • setClob

        void setClob(String parameterName,
                     Clob x)
              throws SQLException
        Sets the designated parameter to the given java.sql.Clob object. The driver converts this to an SQL CLOB value when it sends it to the database.
        Parameters:
        parameterName - the name of the parameter
        x - a Clob object that maps an SQL CLOB value
        Throws:
        SQLException - if a database access error occurs or this method is called on a closed CallableStatement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        1.6
      • setClob

        void setClob(String parameterName,
                     Reader reader)
              throws SQLException
        Sets the designated parameter to a Reader object. This method differs from the setCharacterStream (int, Reader) method because it informs the driver that the parameter value should be sent to the server as a CLOB. When the setCharacterStream method is used, the driver may have to do extra work to determine whether the parameter data should be send to the server as a LONGVARCHAR or a CLOB

        Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setClob which takes a length parameter.

        Parameters:
        parameterName - the name of the parameter
        reader - An object that contains the data to set the parameter value to.
        Throws:
        SQLException - if a database access error occurs or this method is called on a closed CallableStatement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        1.6
      • setArray

        void setArray(int i,
                      Array x)
               throws SQLException
        Sets the designated parameter in this RowSet object's command with the given Array value. The driver will convert this to the ARRAY value that the Array object represents before sending it to the database.
        Parameters:
        i - the first parameter is 1, the second is 2, ...
        x - an object representing an SQL array
        Throws:
        SQLException - if a database access error occurs
      • setDate

        void setDate(int parameterIndex,
                     Date x,
                     Calendar cal)
              throws SQLException
        Sets the designated parameter in this RowSet object's command with the given java.sql.Date value. The driver will convert this to an SQL DATE value, using the given java.util.Calendar object to calculate the date.
        Parameters:
        parameterIndex - the first parameter is 1, the second is 2, ...
        x - the parameter value
        cal - the java.util.Calendar object to use for calculating the date
        Throws:
        SQLException - if a database access error occurs
      • setDate

        void setDate(String parameterName,
                     Date x)
              throws SQLException
        Sets the designated parameter to the given java.sql.Date value using the default time zone of the virtual machine that is running the application. The driver converts this to an SQL DATE value when it sends it to the database.
        Parameters:
        parameterName - the name of the parameter
        x - the parameter value
        Throws:
        SQLException - if a database access error occurs or this method is called on a closed CallableStatement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        1.4
        See Also:
        ResultSet.getDate(int)
      • setDate

        void setDate(String parameterName,
                     Date x,
                     Calendar cal)
              throws SQLException
        Sets the designated parameter to the given java.sql.Date value, using the given Calendar object. The driver uses the Calendar object to construct an SQL DATE value, which the driver then sends to the database. With a a Calendar object, the driver can calculate the date taking into account a custom timezone. If no Calendar object is specified, the driver uses the default timezone, which is that of the virtual machine running the application.
        Parameters:
        parameterName - the name of the parameter
        x - the parameter value
        cal - the Calendar object the driver will use to construct the date
        Throws:
        SQLException - if a database access error occurs or this method is called on a closed CallableStatement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        1.4
        See Also:
        ResultSet.getDate(int)
      • setTime

        void setTime(int parameterIndex,
                     Time x,
                     Calendar cal)
              throws SQLException
        Sets the designated parameter in this RowSet object's command with the given java.sql.Time value. The driver will convert this to an SQL TIME value, using the given java.util.Calendar object to calculate it, before sending it to the database.
        Parameters:
        parameterIndex - the first parameter is 1, the second is 2, ...
        x - the parameter value
        cal - the java.util.Calendar object to use for calculating the time
        Throws:
        SQLException - if a database access error occurs
      • setTime

        void setTime(String parameterName,
                     Time x)
              throws SQLException
        Sets the designated parameter to the given java.sql.Time value. The driver converts this to an SQL TIME value when it sends it to the database.
        Parameters:
        parameterName - the name of the parameter
        x - the parameter value
        Throws:
        SQLException - if a database access error occurs or this method is called on a closed CallableStatement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        1.4
        See Also:
        ResultSet.getTime(int)
      • setTime

        void setTime(String parameterName,
                     Time x,
                     Calendar cal)
              throws SQLException
        Sets the designated parameter to the given java.sql.Time value, using the given Calendar object. The driver uses the Calendar object to construct an SQL TIME value, which the driver then sends to the database. With a a Calendar object, the driver can calculate the time taking into account a custom timezone. If no Calendar object is specified, the driver uses the default timezone, which is that of the virtual machine running the application.
        Parameters:
        parameterName - the name of the parameter
        x - the parameter value
        cal - the Calendar object the driver will use to construct the time
        Throws:
        SQLException - if a database access error occurs or this method is called on a closed CallableStatement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        1.4
        See Also:
        ResultSet.getTime(int)
      • setTimestamp

        void setTimestamp(int parameterIndex,
                          Timestamp x,
                          Calendar cal)
                   throws SQLException
        Sets the designated parameter in this RowSet object's command with the given java.sql.Timestamp value. The driver will convert this to an SQL TIMESTAMP value, using the given java.util.Calendar object to calculate it, before sending it to the database.
        Parameters:
        parameterIndex - the first parameter is 1, the second is 2, ...
        x - the parameter value
        cal - the java.util.Calendar object to use for calculating the timestamp
        Throws:
        SQLException - if a database access error occurs
      • setTimestamp

        void setTimestamp(String parameterName,
                          Timestamp x,
                          Calendar cal)
                   throws SQLException
        Sets the designated parameter to the given java.sql.Timestamp value, using the given Calendar object. The driver uses the Calendar object to construct an SQL TIMESTAMP value, which the driver then sends to the database. With a a Calendar object, the driver can calculate the timestamp taking into account a custom timezone. If no Calendar object is specified, the driver uses the default timezone, which is that of the virtual machine running the application.
        Parameters:
        parameterName - the name of the parameter
        x - the parameter value
        cal - the Calendar object the driver will use to construct the timestamp
        Throws:
        SQLException - if a database access error occurs or this method is called on a closed CallableStatement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        1.4
        See Also:
        ResultSet.getTimestamp(int)
      • clearParameters

        void clearParameters()
                      throws SQLException
        Clears the parameters set for this RowSet object's command.

        In general, parameter values remain in force for repeated use of a RowSet object. Setting a parameter value automatically clears its previous value. However, in some cases it is useful to immediately release the resources used by the current parameter values, which can be done by calling the method clearParameters.

        Throws:
        SQLException - if a database access error occurs
      • execute

        void execute()
              throws SQLException
        Fills this RowSet object with data.

        The execute method may use the following properties to create a connection for reading data: url, data source name, user name, password, transaction isolation, and type map. The execute method may use the following properties to create a statement to execute a command: command, read only, maximum field size, maximum rows, escape processing, and query timeout.

        If the required properties have not been set, an exception is thrown. If this method is successful, the current contents of the rowset are discarded and the rowset's metadata is also (re)set. If there are outstanding updates, they are ignored.

        If this RowSet object does not maintain a continuous connection with its source of data, it may use a reader (a RowSetReader object) to fill itself with data. In this case, a reader will have been registered with this RowSet object, and the method execute will call on the reader's readData method as part of its implementation.

        Throws:
        SQLException - if a database access error occurs or any of the properties necessary for making a connection and creating a statement have not been set
      • addRowSetListener

        void addRowSetListener(RowSetListener listener)
        Registers the given listener so that it will be notified of events that occur on this RowSet object.
        Parameters:
        listener - a component that has implemented the RowSetListener interface and wants to be notified when events occur on this RowSet object
        See Also:
        removeRowSetListener(javax.sql.RowSetListener)
      • removeRowSetListener

        void removeRowSetListener(RowSetListener listener)
        Removes the specified listener from the list of components that will be notified when an event occurs on this RowSet object.
        Parameters:
        listener - a component that has been registered as a listener for this RowSet object
        See Also:
        addRowSetListener(javax.sql.RowSetListener)
      • setSQLXML

        void setSQLXML(int parameterIndex,
                       SQLXML xmlObject)
                throws SQLException
        Sets the designated parameter to the given java.sql.SQLXML object. The driver converts this to an SQL XML value when it sends it to the database.
        Parameters:
        parameterIndex - index of the first parameter is 1, the second is 2, ...
        xmlObject - a SQLXML object that maps an SQL XML value
        Throws:
        SQLException - if a database access error occurs, this method is called on a closed result set, the java.xml.transform.Result, Writer or OutputStream has not been closed for the SQLXML object or if there is an error processing the XML value. The getCause method of the exception may provide a more detailed exception, for example, if the stream does not contain valid XML.
        Since:
        1.6
      • setSQLXML

        void setSQLXML(String parameterName,
                       SQLXML xmlObject)
                throws SQLException
        Sets the designated parameter to the given java.sql.SQLXML object. The driver converts this to an SQL XML value when it sends it to the database.
        Parameters:
        parameterName - the name of the parameter
        xmlObject - a SQLXML object that maps an SQL XML value
        Throws:
        SQLException - if a database access error occurs, this method is called on a closed result set, the java.xml.transform.Result, Writer or OutputStream has not been closed for the SQLXML object or if there is an error processing the XML value. The getCause method of the exception may provide a more detailed exception, for example, if the stream does not contain valid XML.
        Since:
        1.6
      • setRowId

        void setRowId(int parameterIndex,
                      RowId x)
               throws SQLException
        Sets the designated parameter to the given java.sql.RowId object. The driver converts this to a SQL ROWID value when it sends it to the database
        Parameters:
        parameterIndex - the first parameter is 1, the second is 2, ...
        x - the parameter value
        Throws:
        SQLException - if a database access error occurs
        Since:
        1.6
      • setRowId

        void setRowId(String parameterName,
                      RowId x)
               throws SQLException
        Sets the designated parameter to the given java.sql.RowId object. The driver converts this to a SQL ROWID when it sends it to the database.
        Parameters:
        parameterName - the name of the parameter
        x - the parameter value
        Throws:
        SQLException - if a database access error occurs
        Since:
        1.6
      • setNString

        void setNString(int parameterIndex,
                        String value)
                 throws SQLException
        Sets the designated parameter to the given String object. The driver converts this to a SQL NCHAR or NVARCHAR or LONGNVARCHAR value (depending on the argument's size relative to the driver's limits on NVARCHAR values) when it sends it to the database.
        Parameters:
        parameterIndex - of the first parameter is 1, the second is 2, ...
        value - the parameter value
        Throws:
        SQLException - if the driver does not support national character sets; if the driver can detect that a data conversion error could occur ; or if a database access error occurs
        Since:
        1.6
      • setNString

        void setNString(String parameterName,
                        String value)
                 throws SQLException
        Sets the designated parameter to the given String object. The driver converts this to a SQL NCHAR or NVARCHAR or LONGNVARCHAR
        Parameters:
        parameterName - the name of the column to be set
        value - the parameter value
        Throws:
        SQLException - if the driver does not support national character sets; if the driver can detect that a data conversion error could occur; or if a database access error occurs
        Since:
        1.6
      • setNCharacterStream

        void setNCharacterStream(int parameterIndex,
                                 Reader value,
                                 long length)
                          throws SQLException
        Sets the designated parameter to a Reader object. The Reader reads the data till end-of-file is reached. The driver does the necessary conversion from Java character format to the national character set in the database.
        Parameters:
        parameterIndex - of the first parameter is 1, the second is 2, ...
        value - the parameter value
        length - the number of characters in the parameter data.
        Throws:
        SQLException - if the driver does not support national character sets; if the driver can detect that a data conversion error could occur ; or if a database access error occurs
        Since:
        1.6
      • setNCharacterStream

        void setNCharacterStream(String parameterName,
                                 Reader value,
                                 long length)
                          throws SQLException
        Sets the designated parameter to a Reader object. The Reader reads the data till end-of-file is reached. The driver does the necessary conversion from Java character format to the national character set in the database.
        Parameters:
        parameterName - the name of the column to be set
        value - the parameter value
        length - the number of characters in the parameter data.
        Throws:
        SQLException - if the driver does not support national character sets; if the driver can detect that a data conversion error could occur; or if a database access error occurs
        Since:
        1.6
      • setNCharacterStream

        void setNCharacterStream(String parameterName,
                                 Reader value)
                          throws SQLException
        Sets the designated parameter to a Reader object. The Reader reads the data till end-of-file is reached. The driver does the necessary conversion from Java character format to the national character set in the database.

        Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

        Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setNCharacterStream which takes a length parameter.

        Parameters:
        parameterName - the name of the parameter
        value - the parameter value
        Throws:
        SQLException - if the driver does not support national character sets; if the driver can detect that a data conversion error could occur ; if a database access error occurs; or this method is called on a closed CallableStatement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        1.6
      • setNClob

        void setNClob(String parameterName,
                      NClob value)
               throws SQLException
        Sets the designated parameter to a java.sql.NClob object. The object implements the java.sql.NClob interface. This NClob object maps to a SQL NCLOB.
        Parameters:
        parameterName - the name of the column to be set
        value - the parameter value
        Throws:
        SQLException - if the driver does not support national character sets; if the driver can detect that a data conversion error could occur; or if a database access error occurs
        Since:
        1.6
      • setNClob

        void setNClob(String parameterName,
                      Reader reader,
                      long length)
               throws SQLException
        Sets the designated parameter to a Reader object. The reader must contain the number of characters specified by length otherwise a SQLException will be generated when the CallableStatement is executed. This method differs from the setCharacterStream (int, Reader, int) method because it informs the driver that the parameter value should be sent to the server as a NCLOB. When the setCharacterStream method is used, the driver may have to do extra work to determine whether the parameter data should be send to the server as a LONGNVARCHAR or a NCLOB
        Parameters:
        parameterName - the name of the parameter to be set
        reader - An object that contains the data to set the parameter value to.
        length - the number of characters in the parameter data.
        Throws:
        SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if the length specified is less than zero; if the driver does not support national character sets; if the driver can detect that a data conversion error could occur; if a database access error occurs or this method is called on a closed CallableStatement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        1.6
      • setNClob

        void setNClob(String parameterName,
                      Reader reader)
               throws SQLException
        Sets the designated parameter to a Reader object. This method differs from the setCharacterStream (int, Reader) method because it informs the driver that the parameter value should be sent to the server as a NCLOB. When the setCharacterStream method is used, the driver may have to do extra work to determine whether the parameter data should be send to the server as a LONGNVARCHAR or a NCLOB

        Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setNClob which takes a length parameter.

        Parameters:
        parameterName - the name of the parameter
        reader - An object that contains the data to set the parameter value to.
        Throws:
        SQLException - if the driver does not support national character sets; if the driver can detect that a data conversion error could occur; if a database access error occurs or this method is called on a closed CallableStatement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        1.6
      • setNClob

        void setNClob(int parameterIndex,
                      Reader reader,
                      long length)
               throws SQLException
        Sets the designated parameter to a Reader object. The reader must contain the number of characters specified by length otherwise a SQLException will be generated when the PreparedStatement is executed. This method differs from the setCharacterStream (int, Reader, int) method because it informs the driver that the parameter value should be sent to the server as a NCLOB. When the setCharacterStream method is used, the driver may have to do extra work to determine whether the parameter data should be sent to the server as a LONGNVARCHAR or a NCLOB
        Parameters:
        parameterIndex - index of the first parameter is 1, the second is 2, ...
        reader - An object that contains the data to set the parameter value to.
        length - the number of characters in the parameter data.
        Throws:
        SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if the length specified is less than zero; if the driver does not support national character sets; if the driver can detect that a data conversion error could occur; if a database access error occurs or this method is called on a closed PreparedStatement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        1.6
      • setNClob

        void setNClob(int parameterIndex,
                      NClob value)
               throws SQLException
        Sets the designated parameter to a java.sql.NClob object. The driver converts this to a SQL NCLOB value when it sends it to the database.
        Parameters:
        parameterIndex - of the first parameter is 1, the second is 2, ...
        value - the parameter value
        Throws:
        SQLException - if the driver does not support national character sets; if the driver can detect that a data conversion error could occur ; or if a database access error occurs
        Since:
        1.6
      • setNClob

        void setNClob(int parameterIndex,
                      Reader reader)
               throws SQLException
        Sets the designated parameter to a Reader object. This method differs from the setCharacterStream (int, Reader) method because it informs the driver that the parameter value should be sent to the server as a NCLOB. When the setCharacterStream method is used, the driver may have to do extra work to determine whether the parameter data should be sent to the server as a LONGNVARCHAR or a NCLOB

        Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setNClob which takes a length parameter.

        Parameters:
        parameterIndex - index of the first parameter is 1, the second is 2, ...
        reader - An object that contains the data to set the parameter value to.
        Throws:
        SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if the driver does not support national character sets; if the driver can detect that a data conversion error could occur; if a database access error occurs or this method is called on a closed PreparedStatement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        1.6
      • setURL

        void setURL(int parameterIndex,
                    URL x)
             throws SQLException
        Sets the designated parameter to the given java.net.URL value. The driver converts this to an SQL DATALINK value when it sends it to the database.
        Parameters:
        parameterIndex - the first parameter is 1, the second is 2, ...
        x - the java.net.URL object to be set
        Throws:
        SQLException - if a database access error occurs or this method is called on a closed PreparedStatement
        SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        1.4


Content

Android Reference

Java basics

Java Enterprise Edition (EE)

Java Standard Edition (SE)

SQL

HTML

PHP

CSS

Java Script

MYSQL

JQUERY

VBS

REGEX

C

C++

C#

Design patterns

RFC (standard status)

RFC (proposed standard status)

RFC (draft standard status)

RFC (informational status)

RFC (experimental status)

RFC (best current practice status)

RFC (historic status)

RFC (unknown status)

IT dictionary

License.
All information of this service is derived from the free sources and is provided solely in the form of quotations. This service provides information and interfaces solely for the familiarization (not ownership) and under the "as is" condition.
Copyright 2016 © ELTASK.COM. All rights reserved.
Site is optimized for mobile devices.
Downloads: 1708 / . Delta: 0.13954 с